6 Amazing Steps In Installing Synthetic Lawns In Sydney

As companies starts acquiring wide network of highly qualified and certified installers, they must understands that one way of cutting costs on all home improvement projects is to do it by your own effort. In this sense, installing artificial grass by yourself will save you an amount that you can use to other important things. There is nothing to worry about installing the accessory because it is so easy to do. Homeowners will be able to do it themselves at home even without our help through this detailed overview of the entire installation process.

Each of the step in synthetic lawns installation in Sydney is vital to come up with the best results on your lawn or garden. Once you are able to follow all the instructions, you will be able to avoid all future complications. Anything may happen beyond your control. Hence, we should avoid them just before things get more complicated.

Here is the detailed procedure for installing artificial grass on your lawn:

Step 1: Using a 100 foot tape measure, get the measurement of your yard. For added convenience, you may utilize an aerial map app such as Google Maps to identify the size of the turf that you will need. You can call us for assistance at 855-464 TURF in using Google Maps. Feel free to give us a call for inquiries and questions.

Step 2: Remove all debris and vegetation at the same time. Accumulate crushed rock to use as the base leveling it with the landscaping rake. Spray the base with water then compact the area using a water-filled roller.

Step 3: Unroll the artificial grass then lay it out on the surface of the base. Line up the edges and cut off both ends. Consequently, fold back the turf piece by piece then start rolling out the seam tape exactly on the middle of the turf turned into pieces then apply adhesive. Do the same on the other piece of turf until all are rolled out with the tape.

Step 4: To ensure that the grass fibers will stand up, you may utilize a stiff-bristled broom for this one. Remember that the fibers might have been steadily flat in a roll.

Step 5: Next, use a spreader or broadcaster for adding sand in between the fibers of the artificial grass. The recommended measure depth of the sand is approximately 1/2” to ¾”. Then, you will need to brush again the grass to infiltrate the sand down to the fibers.

Step 6: Lastly, place the turf within the perimeter of your place every 3 feet. If you want to add design and more life to your artificial lawn, you may add edging, border and even colorful rock to look natural and attractive at the same time.

If you can’t still understand the above-mentioned steps, ask the nearest service provider near you. Aside from they can provide you suggestion, they can also help you choose the best removalists in Ryde for the transportation of synthetic lawns.